In the working process of the Calcium Carbonate Plant, different parts play different roles. When used, the wear is different. The wear will cause the performance of the equipment to gradually decrease. When the wear is serious, the parts can no longer assist the production. The smooth progress, this time you need to replace the parts, different parts have different replacement cycles, then when it is required for the pallet, when do you need to replace it? 

In the interior of the mill, the blade is mainly welded on the pallet. The blade is an important part that shovels the material into the middle of the grinding ring and pulverizes. It has direct contact with the material, so it is in production. There will be wear and tear, which belongs to one of the wear parts of the equipment. In the production, the replacement cycle is shorter than that of the parts such as the pallet. Generally speaking, many customers will have doubts. The plates are welded together, so when the blade is replaced, does the pallet need to be replaced? In fact, it is necessary to look at the wear of the pallet. Generally speaking, if the pallet wear is not serious, it can be replaced without replacing the blade, because if the blade is replaced directly with the pallet, the cost will be wasted. For one thing, after replacing the blade, it is only necessary to weld the new blade to the pallet at a certain angle. This is a relatively cost-effective way. In the interior of the mill, the pallets are usually fixed on the blade by connecting screws, and some of the three holes are four holes, but in general, the pallet needs to be fixed to enable the blade. It is fixed on the pallet, so whether it is the installation process of the new machine or the welding process after the blade or the pallet replacement, it is necessary to ensure that the pallet is fixed, so as to ensure the stability of the blade and ensure the production. Going smoothly.