5052 aluminum sheet is normally used aluminum-magnesium alloy material, it's miles the maximum typically used material in the excessive-degree aluminum latest years. Conventional mood are H32 and O. 5052 aluminum sheet is the most extensively used rust-evidence aluminum, this alloy is with high electricity, specially with anti-fatigue power, high plasticity and corrosion resistance, the plastic overall performance is right in the semi-functional cold difficult.

5052 represents the product’s grade, with five at the start, representative of the product belongs to the aluminum-magnesium alloy merchandise, after which in keeping with chemical composition can see the fabricated from magnesium alloy content material of 2.2-2.Eight%, the density is 2.Sixty eight. H32 on behalf of the product processing state H can be understood as incomplete annealing and processing hardening state, that is the product thorough annealing manner, degradation of the hardness suitable for processing molding, and which will avoid the product hardness is too soft, and the right paintings hardening. The 32 on behalf of the modified product after a solid treatment hardness of one/4. Usually the last wide variety of the Arabic numerals and hardness values are immediately related, consisting of H32 H34 H24 h18, the remaining Arabic numerals constitute the hardness, in the identical grade aluminum, the bigger Arabic numerals are, the higher the hardness is, which include H34 hardness is higher than H32, the most smooth temper is O nation, greater appropriate as a stretch fabric.

5052 aluminum sheet with the mood of H32 mans the aluminum-magnesium alloy with magnesium content material is inside the region of 2.5%, after a stable treatment of incomplete annealing plus hardening processing state, the hardness is 1 / four. Typically the product corrosion resistance is powerful, the floor oxidation effect is good, bending ability is right, ninety tiers bending does no longer crack, is a standard sheet metallic material, appropriate for chassis shelves and the conventional substances of different products need to bend.